SafeWay’s FFE49 Series is a non-spill, push-to-connect,
fluid transfer quick coupling designed for use with most
industrial fluids. This series is interchangeable with quick
couplings meeting International Standard ISO 16028
dimensional requirements, and our field proven, heavy-duty
FF49 Series. Some basic applications include
skid-steer loaders, power utility equipment, construction
equipment, agricultural equipment, and hydraulic hand
tools. Use this quick coupling series whenever spillage
can result in a safety or environmental hazard, when air
inclusion during connection to a hydraulic system cannot
be tolerated, and when international interchangeability
with other brands is required.
Smooth, one hand, push-to-connect locking mechanism.
Minimum air inclusion during connection and minimum fluid
spillage during disconnection.
Interchangeable half-for-half with Parker FEM Series, Aeroquip
FD89, Holmbury FIRG and FIMC Series, Faster 2FFI Series,
and others conforming to International Standard ISO 16028
Rugged Flush Face valving allows easy cleaning to minimize
Maximum flow for quick system response.
Available in ISO 1/4" through ISO 1" body size in a variety of
thread sizes and styles.
If you require a 3/8" size please use the FF49 Series, which meets the interchange requirements of ISO 16028 while providing higher operating psi. Sleeve lock is standard.
Anti-blowout Buna and Teflon® tip half seal reduces the
likelihood of premature failure due to connection under
residual system pressure. This residual system pressure is 250
psi max. in the 3/8" body size and higher in the other sizes.
SafeWay began a running change from zinc and
yellow chromate plating (gold appearance) to ROHS
compliant plating (silver appearance) in 2007.
All FFE49 Series quick couplings are 100% leak tested before
leaving the factory.
Heat treated surfaces resist wear.
Sleeve lock option, to minimize accidental disconnect, is
available upon request.
Method of obtaining and presenting performance data
conforms to ANSI (NFPA) T3.20.2.R2, Hydraulic fluid power
- Quick action couplings - Test methods.
Temperature Range: Standard Seals (Buna-N) -40° to +250° F Viton® Option -15° to +450° F Other Seals Available.
Vacuum Data: 27.4 inches Hg. both connected and disconnected — all sizes.
Viton® is a registered trademark of DuPont Dow Elastomers.
Pressure rating (Max. Operating Pressure) is based on Non-Pulsating, Low Cycle applications with essentially steady pressure during the operating cycle.
Please consult factory regarding other applications.