Providing you with all your hydraulic coupling needs
SafeWay’s heavy-duty double break-away clamps
allow one-hand hook-up when used with two-way
sleeve style agricultural quick couplings. They also
allow implement break-away when used with either
one-way or two-way sleeve agricultural designs.
Double break-away clamps are available for 3/8"
and 1/2" body size agricultural quick couplings.
Bulkhead mounting rings provide for bulkhead
mounting (up to 1/8" thick) of our S40 Series and
S70 Series female couplers. Please refer to the
accessories chart below with your specific
Dust Caps & Dust Plugs
Protective dust caps and dust plugs are available in rubber or Steel, with steel chain & ring or as a unique molded 1-piece combination cap/plug (far right). Our NEW S449 Series molded cap/plug is available in 1/4", 3/8" and 1/2" sizes. The 1/2" S449-4M is available in Black (-4M),
Blue (-4MB), Red (-4MR) & Green (-4MG). Please refer to the accessories chart below for information about your specific requirement.
Both replacement seal kits and individual O-rings
and back-up rings are available. Leakage between
the female body half (coupling) and the male tip
half (nipple) is an indication that the body O-ring
Field repair kits that include the body seal, a new
poppet assembly and installation instructions are
available for large sized S10 Series and S56 Series couplings. Please refer to the accessories chart below with your specific requirement.
Reducer Bushings downsize the 1/2" female pipe
thread standard on quick couplings to either a 3/8"
or 1/4" female pipe thread. The S4-2 reduces a 1/2"
pipe thread to 1/4" NPT. The S4-3 reduces a 1/2"
pipe thread to a 3/8" NPT.